H3C Technologies H3C Intelligent Management Center User Manual
Page 186
172
Options are IMC local Password, RADIUS, or LDAP. You must configure the IMC Authentication
Service module for LDAP and RADIUS before operators can authenticate using these methods of
authentication.
5.
If you have elected to use IMC local password feature by selecting Password from the
Authentication Type list, modify the operator's password in the Password field.
6.
If you have elected to use IMC local password feature by selecting Password from the
Authentication Type, re-enter the operator's new password in the Confirm Password field.
7.
Modify the Idle Timeout setting as needed.
8.
Select Same as System Settings if you want to apply system wide settings to this operator account.
9.
Select Configure Individually if you want to configure the Idle Timeout for this operator.
10.
Enter the idle timeout in minutes for this operator in the field located to the right of the Idle Timeout
list.
11.
Modify the operator group as needed, selecting either Maintainer Group or Viewer Group.
The Operator Group list displays all currently configured operator groups.
12.
Select from the pre-defined IMC operator groups or configure your own.
To create and configure your own operator group, see "
." To configure
this operator as a member of the Administrator Group, see "
A Maintainer has access to all operations except those reserved exclusively for administrators.
Maintainers also have access to maintainer specific resources and certain system level information
and resources.
A Viewer also has access to specific resources but has read-only access to system level information
and resources.
13.
Modify the description for this operator as needed in the Description field.
14.
Modify which device groups and user groups operators have access to in the Managed Groups
section.
15.
If you want the operator to have the ability to manage all device and user groups, click the
Manage All Groups radio button and skip to Step 11.
16.
If you want the operator to manage only a subset of device and user groups that you choose, click
the Define Manageable Groups radio button .
The page updates to display the list of Managed Device Groups and Managed User Groups.
17.
Do one of the following:
{
Click the checkboxes next to the Managed Device Groups for which you want to grant
operator access and control, or
{
Click the checked boxes next to the Managed Device Groups for which you want to revoke
operator access and control, or
{
Click the Expand icon to view Managed User Groups, or
{
Click the checkboxes next to the Managed User Groups for which the operator has
management access and control, or
{
Click the checked boxes next to the Managed User Groups for which you want to revoke
operator access and control.
{
To select all subgroups of a user group, click the Operation icon
for the user group and
select Select All Child Nodes from the shortcut menu.