H3C Technologies H3C Intelligent Management Center - Manual (Page 553)

539
− Existing Baseline Software—Existing baseline software on the device model. To remove
baseline from baseline software, click Remove from Baseline to the right of the baseline
software.
− Delete—Click the Delete icon for a device model to delete the device model from the list.
11. Click Next.
The Baseline Result page appears.
Removing baseline from baseline software
You can remove baseline from baseline software for devices or devices models.
To remove baseline from baseline software:
1. Navigate to Service > Software Library.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click the Software Library under Configuration Center from the navigation system on the left.
All files in the software library are displayed in the Software Library list.
2. Click the Operation icon for the baseline software from which you want to remove baseline
and select Remove Baseline from the menu that appears.
The Remove Device Software Baseline in Batches page appears.
3. Do one of the following:
{
To select another software file, click Select located to the right of the Device Software field and
go to Step 4.
{
To use the current software file, go to Step 6.
4. Select the baseline software from which you want to remove baseline on the Select Software
dialog box that appears.
5. Click OK.
6. Do one of the following:
{
To remove baseline from one or more devices, select Single Device. All devices that have
baseline established with the software file are displayed in the Select Device with Baseline area.
{
To remove baseline from one or more device models, select Device Model. All device models
that have baseline established with the software file are displayed in the Select Device Model
with Baseline area.
7. Select one or more devices or device models.
8. Click Remove Baseline.
The operation result appears at the upper right of the page.
Comparing device configurations
You can compare the contents of configuration files, including current startup configuration files, current
running configuration files, and backup configuration files by using the Configuration Compare function
of iCC.
Configuration Compare applies in the following scenarios: