H3C Technologies H3C Intelligent Management Center User Manual
Page 594

580
Column heading
Description
Required
SnmpParaSecuMode
Security mode. The value can be:
•
1 for no authentication and no encryption
•
2 for authentication and no encryption
•
3 for authentication and encryption
The SnmpParaAuthScheme and SnmpParaPrivScheme columns
must have the same value as this column.
No
SnmpParaAuthScheme
Authentication mode. The value can be:
•
1 for none
•
2 for MD5
•
3 for SHA
No
SnmpParaAuthPassword Authentication
password,
which contains 32 characters at most.
No
SnmpParaPrivScheme
Encryption mode. The value can be:
•
1 for none
•
2 for DES
•
19 for AES128
•
21 for AES256
No
SnmpParaPrivPassword Encryption password, which contains 32 characters at most.
No
SnmpParaTimeOut Operation
timeout period (in seconds), which is 4 by default.
No
SnmpParaRetry
Maximum number of SNMP retries allowed, which is 3 by default. No
PingDevType
Indicates whether or not the ping operation is supported. The value
can be:
•
1 for yes
•
0 for no
No
changTelnet
Indicates whether or not the device's Telnet parameters are different
from those in the existing configuration file on the device. The value
can be:
•
0 for no
•
1 for yes
No
TelnetStyle
Telnet type. The value can be:
•
0 for password
•
1 for username+password
•
2 for super password
•
3 for password+super password
•
4 for username+password+super password
•
5 for no username+no password
•
6 for username+no password
No
TelnetUseName Telnet
username.
No
TelnetPassword Telnet
password.
No
TelnetSuperWord
Telnet super password.
No
TelnetTimeout
Telnet timeout period, ranging from 1 to 60 seconds.
No