H3C Technologies H3C Intelligent Management Center - Manual (Page 207)

193
The login mode for a device using SFTP must be SSH, and the SSH parameters configured in
IMC must be the same as those configured on the device.
{
SCP: This option can be used to transfer the configuration file from the device to the IMC sever
by using a secure transmission method.
To transfer files using SCP, you must configure the login mode of the device as SSH in IMC, and
configure the same SSH parameters in IMC and on the device.
To enable FTP transfer mode:
1. Click the checkbox to the left of Enable FTP Transfer Mode.
2. In the FTP User Name field, enter the user name for the FTP account configured on the managed
devices that uses the Default Transfer Mode setting.
3. In the FTP Password field, enter the password for the FTP account configured on the managed
devices that uses the Default Transfer Mode setting.
All devices that use the default transfer mode settings must have the same user name and
passwords as configured in Step 2 and Step 3.
IMC provides you with the ability to configure exceptions to the Default Transfer Mode
configuration. Using the Single Device Transfer Mode option, you can configure one or more
devices to use a different transfer mode configuration than the default. To use this feature, follow
the steps below.
4. Otherwise, click OK to complete your configuration of the Default Transfer Mode option for all
devices in IMC.
5. Click Select Device to configure the selected devices with specific transfer mode configurations.
6. You can add devices by using either the View or Advanced query option. See " Adding devices by
View " and " Adding devices by Advanced query ."
To set or cancel the transfer mode option for one or more devices:
1. Click the checkbox to the left of each device.
2. Click Set Mode.
The Select Transfer Mode dialog box appears.
3. Select the transfer mode you want to use for each of the selected devices from the Transfer Mode
list.
4. Click OK.
All devices that are not configured using the single device transfer mode adopt the default transfer
mode.
To remove the single device transfer mode option from one or more devices:
1. Click the checkbox to the left of the device in the device list, and then click Cancel Mode.
2. Click OK to accept your default and device specific transfer mode options.
Backup policy options
Operators can configure the backup policy options for individual devices managed by IMC. Options
include Alarm Generation Mode and Max Backup Configuration Files.
Setting the alarm generation mode
This option enables IMC to generate alarms or disables IMC from generating any alarm for individual
devices when their configurations to be backed up are different from the baseline configurations or last