H3C Technologies H3C Intelligent Management Center - Manual (Page 653)

639
You can sort the Display Command List by the Name, Description, and Creation Time fields. Click
the column label to sort the list by the selected field. The column label is a toggle switch that lets you
toggle between the various sort options specific to each field.
If the Display Command List contains enough entries, the following navigational aids appear:
{
Click to page forward in the Display Command List.
{
Click to page forward to the end of the Display Command List.
{
Click to page backward in the Display Command List.
{
Click to page backward to the front of the Display Command List.
2. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items per
page you want to view.
Adding a configuration check display command
To add a configuration check display command:
1. Navigate to Service > Display Command.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Compliance Center on the navigation tree on the left.
c. Click Display Command under Compliance Center on the left navigation tree.
The Display Command List appears.
2. Click Add.
3. Enter a name for the display command in the Name field.
Display Command names cannot begin or end with a period (.). Spaces in the configuration
template name are also not permitted. In addition, the characters in
Table 30 are not permitted in
a display command file name.
Table 30 Invalid characters
Character Name Character Name
* Asterisk ' Apostrophe or single quotation
| Vertical bars : Colon
\ Backslash " Double quotation
/ Forward slash < > Angle brackets
? Question mark
4. Enter a description for the display command in the Description field.
5. Enter the display command in the Content field.
For example, the following command displays the SNMP read community string on a 3Com
switch.
display snmp-agent community read
6. Click OK to create the display command.
After you create a display command list, you can select a display command from the created
display command list when you select Display command output from the Check Target list.
Modifying configuration display commands
To modify a configuration check display command: