H3C Technologies H3C Intelligent Management Center - Manual (Page 140)

126
IMC displays all SNMP template entries in the SNMP Template List displayed in the main pane of
the System > SNMP Template window.
2. Click the Modify icon in the SNMP Template List associated with the SNMP template you want
to modify.
3. Modify any of the configuration information displayed in the Modify SNMP Template page.
For more information about template parameters, see "
Adding an SNMPv1 or v2c template " or
" Adding an SNMPv3 template ."
4. Click OK.
Deleting an SNMP template
To delete an SNMP template:
1. Navigate to System > SNMP Template:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click SNMP Template under Resource Management from the navigation system on the left.
IMC displays all SNMP template entries in the SNMP Template List displayed in the main pane of
the System SNMP Template window.
2. Click the Delete icon in the SNMP Template List associated with the SNMP template you want to
delete.
3. Click OK to confirm deletion of the selected SNMP template.
Telnet templates
IMC uses Telnet to provide you with remote access to managed devices. IMC also uses Telnet for certain
network resource management functions.
The Telnet template feature allows you to save Telnet configuration settings in IMC, which can then be
applied when adding new devices to IMC, performing an auto discovery, or configuring devices in
individual or batch mode. Telnet templates store IMC Telnet configurations for devices to support IMC
communication with the device. Telnet templates do not configure the Telnet settings on the device itself.
Viewing the Telnet template list
To view the Telnet template list:
1. Navigate to System > Telnet Template:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Telnet Template under Resource Management from the navigation system on the left.
IMC displays all Telnet templates in the Telnet Template List displayed in the main pane of the
System > Telnet Template window.
Telnet template list
• Name: Contains the Telnet template name.
• Authentication Mode: Identifies which form of authentication this template is configured for.
• Timeout (seconds): Contains the Telnet timeout value for the associated template. The Timeout
counter defines how long the system waits for the device to respond in seconds.