H3C Technologies H3C Intelligent Management Center - Manual (Page 584)

570
All existing automatic deployment plans is displayed in the Auto Deployment Plan page.
2. Click the icon in the Operation field associated with the deployment plan you want to modify.
The Auto Deployment Plan dialog box appears.
You cannot modify the name of a deployment plan once you have created it. You must delete the
existing deployment plan and create a new deployment plan with the new name.
3. Modify the description for this deployment plan in the Description field.
Valid description length is 0–128 characters.
4. Click OK to accept your deployment plan configuration changes.
5. Review the results of the modify operation in the Auto Deployment Plan page.
Deleting an automatic deployment plan
To delete an existing automatic deployment plan:
1. Navigate to Service > Auto Deployment Plan.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click the Auto Deployment Plan under Configuration Center from the navigation system on the
left.
All existing automatic deployment plans is displayed in the Auto Deployment Plan page.
2. Click the icon in the Operation field associated with the deployment plan you want to delete.
You cannot delete an automatic deployment plan containing devices on which automatic
deployment is being executed.
3. Click OK to confirm deletion of the deployment plan.
4. Review the results of the delete operation in the Auto Deployment Plan page.
Viewing detailed information about an automatic deployment device
To view detailed information about an automatic deployment device in the existing automatic
deployment plan
1. Navigate to Service > Auto Deployment Plan.
a. Click the Service tab from the tabular navigation system on the top.
b. Click Configuration Center on the navigation tree on the left.
c. Click Auto Deployment Plan under Configuration Center from the navigation system on the left.
All existing automatic deployment plans are displayed in the Auto Deployment Plan page.
2. Click the icon with the deployment plan you want to expand.
All existing devices in the deployment plan appear.
3. Click the icon in the Operation field associated with the device you want to view.
The Auto Deployment Device
dialog box is displayed, and shows detailed information about the
automatic deployment device, including the configuration file to deploy, software to deploy, CLI
script, device basic information, device information, and access parameters.
Adding an automatic deployment device
You can configure the following parameters on the device to which an automatic deployment device is
deployed: configuration file to deploy, software to deploy, CLI script, device information, and access
parameters.