Set access rights of report template, Copying an operator group – H3C Technologies H3C Intelligent Management Center User Manual
Page 170
156
If the group is an administrator group, the page displays all data modules that the administrator
can view. If the group is of another type, the page displays data modules that can be configured.
3.
Two methods are available for configuring the data access rights to data modules. The following
two sections take setting the data access rights to Real-Time Monitoring and setting the access
rights to report templates for an example.
Configuring the access rights to Real-Time Monitoring
1.
On the Data Privilege Configure page, click the Real-Time Monitoring link.
The page updates to display all monitors in Real-Time Monitoring. The Monitor Name column
displays the names of monitors.
2.
Do one of the following:
•
Click the box next to a monitor to allow the operators in the operator group to access the monitor.
•
Clear the box next to a monitor to prevent the operators in the operator group from accessing the
monitor.
•
Click the box next to Monitor Name to allow operators in the operator group to access all monitors.
3.
From the Access Right list for a monitor name, select the access right of the operator group:
•
Select Read Only to allow operators in an operator group only to view the current monitor and
change the background color of the monitor graphs.
•
Select Read/Write to allow operators to modify the current monitor and customize the four
configuration items.
4.
Click OK.
Set access rights of report template
1.
On the Data Privilege Configure page, cl
link.
The page updates to display all report templates.
Report Template List contents
{
Template Name— Contains the name of the system-defined or user-defined template.
{
Type—Contains the type of report that is generated by the associated template.
{
Definition Type—Identifies the source of the template. Template sources include Custom or
Pre-defined reports.
2.
Do one of the following:
•
Click the box next to a template to allow operators in the operator group to use the template.
•
Clear the box next to a template to prevent the operators in the operator group from using the
template.
•
Click the box next to Template Name to allow operators in the operator group to use all templates.
3.
Click OK.
Copying an operator group
To copy an operator group:
1.
Navigate to System > Operator Group.
a.
Click the System tab from the tabular navigation system on the top.
b.
Click Operator Management on the navigation tree on the left.
c.
Click
Operator Group under Operator Management from the navigation system on the left.