Basler Electric DECS-250N - Manual (Page 349)

9440500990 Rev D 333
DECS-250N Analog Expansion Module
RTD Inputs
BESTCOMSPlus Navigation Path: Metering, Status, Inputs, Remote RTD Inputs
HMI Navigation Path: Metering, Status, Inputs, Remote Analog Input Values
The value and status of the remote RTD inputs are shown on this screen. The status is TRUE when the
corresponding LED is green. Refer to Figure 182. Remote RTD Input #1 is shown.
Figure 182. Remote RTD Inputs Metering
Thermocouple Inputs
BESTCOMSPlus Navigation Path: Metering, Status, Inputs, Remote Thermocouple Inputs
HMI Navigation Path: Metering, Status, Inputs, Remote Analog Input Values
The value and status of the remote thermocouple inputs are shown on this screen. The status is TRUE
when the corresponding LED is green. Refer to Figure 183. Remote Thermocouple Input #1 is shown.
Figure 183. Remote Thermocouple Inputs Metering
Analog Input Values
BESTCOMSPlus Navigation Path: Metering, Status, Inputs, Remote Analog Input Values
HMI Navigation Path: Metering, Status, Inputs, Remote Analog Input Values
The values of the scaled analog inputs, raw analog inputs, RTD input temperatures, raw RTD inputs,
thermocouple input temperatures, and raw thermocouple inputs are shown on this screen.
For each analog input, the raw metered input value is displayed, and the scaled metered input value. This
is useful to check if the AEM-2020 is seeing a valid raw input value (i.e. the raw 0 to 10 volt voltage input
or 4 to 20 mA current input). The scaled value is the raw input scaled up to the range specified by the
Parameter Minimum and Parameter Maximum value parameters in the Remote Analog Input settings.
Refer to Figure 184.