Basler Electric DECS-250N - Manual (Page 151)

9440500990 Rev D 135
DECS-250N BESTCOMSPlus ® Software
Automatic Metering Export
The auto export metering function automatically exports metering data over a user-defined period when a
DECS-250N connection is active. The user specifies the Number of Exports and the Interval between
each export. Enter a filename for the metering data and a folder in which to save. The first export is
performed immediately after clicking the Start button. Click the Filter button to select specific metering
screens. Figure 122 illustrates the Auto Export Metering screen.
Figure 122. Auto Export Metering Screen
Firmware Updates
Future enhancements to the DECS-250N functionality may require a firmware update. Because default
settings are loaded when DECS-250N firmware is updated, your settings should be saved in a file prior to
upgrading firmware.
Warning!
Before performing any maintenance procedures, remove the
DECS-250N from service. Refer to the appropriate site schematics to
ensure that all steps have been taken to properly and completely de-
energize the DECS-250N.
Caution – Settings will be lost!
Default settings will be loaded into the DECS-250N, reports and
events will be cleared, and the DECS-250N will reboot when firmware
is updated. BESTCOMSPlus
® can be used to download settings and
save the settings in a file so that they can be restored after updating
firmware. Refer to Settings File Management for help with saving a
settings file.