Basler Electric DECS-250N - Manual (Page 174)

158 9440500990 Rev D
BESTlogic
™Plus
DECS-250N
Figure 130. PSS-Enabled Default Logic – Logic Page 3 Tab
Figure 131. PSS-Enabled Default Logic - Physical Outputs Tab
Programming BESTlogic
™Plus
Use BESTCOMSPlus to program BESTlogicPlus. Using BESTlogicPlus is analogous to physically
attaching wire between discrete DECS-250N terminals. To program BESTlogicPlus, use the Settings
Explorer within BESTCOMSPlus to open the BESTlogicPlus Programmable Logic tree branch as shown
in Figure 124.
The drag and drop method is used to connect a variable or series of variables to the logic inputs, outputs,
components, and elements. To draw a wire/link from port to port (triangles), click the left mouse button on
a port, pull the wire onto another port, and release the left mouse button. A red port indicates that a