Basler Electric DECS-250N - Manual (Page 200)

184 9440500990 Rev D
Timekeeping DECS-250N
The Time Priority Setup must be used to enable a connected time source. When multiple, time sources
are connected, the Time Priority Setup
I can be used to rank the sources according to their priority.
Figure 158. Clock Setup
A Time Format and Date Format: Time format is 12- or 24-hour mode. Date format is MM-DD-YYYY, DD-
MM-YYYY, or YYYY-MM-DD.
B DST Config: Select Disabled, Floating Dates, or Fixed Dates.
C Start/End Time Reference: Select “Respective to Local Time” or “Respective to UTC Time”.
D For Floating Date DST Configuration:
DST Start Month: Select desired month for DST start.
DST Start Week of Month: Select First, Second, Third, Fourth, or Last.
DST Start Day of Week: Select desired day of the week for DST start.
DST Start Hour: Adjustable from hour 0 to 23 in 1 hour increments.
DST Start Minutes: Adjustable from minute 0 to 59 in 1 minute increments.
For Fixed Date DST Configuration:
DST Start Month: Select desired month for DST start.
: Select desired day (number) of month.
DST Start Hour: Adjustable from hour 0 to 23 in 1 hour increments.
DST Start Minutes: Adjustable from minute 0 to 59 in 1 minute increments.
E For Floating Date DST Configuration:
DST Stop Month: Select desired month for DST stop.
DST Stop Week of Month: Select First, Second, Third, Fourth, or Last.
DST Stop Day of Week: Select desired day of the week for DST stop.
DST Stop Hour: Adjustable from hour 0 to 23 in 1 hour increments.
DST Stop Minutes: Adjustable from minute 0 to 59 in 1 minute increments.