Basler Electric DECS-250N - Manual (Page 158)

142 9440500990 Rev D
BESTlogic
™Plus
DECS-250N
Name Description Symbol
Gen Breaker Fail
to Open The generator breaker did not open in the close
wait time period. (Available when the controller is
equipped with the optional Auto synchronizer, style
number xxxxAxx)
Gen Breaker Fail
to Close The generator breaker did not close in the close
wait time period. (Available when the controller is
equipped with the optional Auto synchronizer, style
number xxxxAxx)
Gen Breaker
Sync Fail True when generator breaker sync has failed.
(Available when the controller is equipped with the
optional Auto synchronizer, style number xxxxAxx)
Gen Dead True when the Generator Breaker Dead condition
settings have been exceeded. (Available when the
controller is equipped with the optional Auto
synchronizer, style number xxxxAxx)
Gen Failed True when the Generator Breaker Stable condition
settings are not met. (Available when the controller
is equipped with the optional Auto synchronizer,
style number xxxxAxx)
Gen Stable True when the Generator Breaker Stable condition
settings have been exceeded. (Available when the
controller is equipped with the optional Auto
synchronizer, style number xxxxAxx)
GOV Contact
Type Proportional True when this option is selected. (Governor Bias
Control Settings screen)
Internal Tracking
Active True when internal tracking is running.
IRIG Sync Lost True when IRIG signal is not being received.
Manual Mode
Active True when the unit is in Manual mode (FCR/FVR).
Network Load
Share Active True when network load sharing is active.
Network Load
Share Config
Mismatch True when the unit’s configuration does not match
the configuration of the other units with load
sharing enabled.
Network Load
Share ID Missing True when any of the load sharing enabled units
are not detected on the network.
Network Load
Share Receiving
ID 1 - 16 True when data is being received from a specific
unit on the load share network.
No Network Load
Share Data
Received True when Network Load Sharing is enabled but
there is no data being received from other network
load sharing devices.
Network Load
Share Status 1-4 This element functions in conjunction with the
Network Load Share Broadcast elements on all
units on the network. True when the corresponding
Network Load Share Broadcast element input is
true on another unit on the network.