Basler Electric DECS-250N - Manual (Page 23)

9440500990 Rev D 7
DECS-250N Controls and Indicators
Figure 3. Menu Structure Overview
Adjusting Settings
A setting adjustment is made at the front panel by performing the following steps.
1. Navigate to the screen listing the setting to be changed.
2. Press the Edit button and enter the appropriate username and password to gain the needed level
of security access. (Information about implementing and using username and password
protection is provided in the Security chapter of this manual.)
3. Highlight the desired setting and press the Edit button to view the setting editing screen. This
screen lists the setting range or the permissible setting selection.
4. Use the scrolling pushbuttons to select the setting digits/selections and adjust/change the setting.
5. Press the Edit button to save the change.
Display Setup
BESTCOMSPlus Navigation Path: Settings Explorer, General Settings, Front Panel HMI
HMI Navigation Path: Settings, General Settings, Front Panel HMI
Front panel display appearance and behavior can be customized to meet user preferences and site
conditions. These BESTCOMSPlus settings are illustrated in Figure 4.
LCD
LCD setup includes a contrast adjustment A to suit the viewing angle used or compensate for
environmental conditions. The ability to reverse the display colors B is provided to accommodate lighting
conditions and user preferences.
Sleep Mode
Sleep mode C reduces the demand on control power by turning off the LCD backlight when no pushbutton
activity is seen for the duration of the LCD Backlight Timeout setting D .
Language
Language modules are available for the DECS-250N. Once a language module is implemented it can be
enabled via the Language Selection setting
E .