Terminals and connectors, Overview – Basler Electric DECS-250N User Manual
Page 131
9440500990 Rev D
115
DECS-250N
Terminals and Connectors
Terminals and Connectors
DECS-250N terminals and connectors are located on the left side panel, front panel, and right side panel.
DECS-250N terminals consist of single-row, multiple-pin headers that mate with removable connectors
wired by the user. DECS-250N connectors vary according to their function and the specified options.
Overview
Figure 107 illustrates the left side panel terminals and Figure 108 illustrates the right side panel
connectors and terminals. Locator letters in each illustration correspond to the terminal block and
connector descriptions in Table 5 and Table 6. The front-panel USB jack is illustrated and described in the
Controls and Indicators chapter of this manual.
Caution
In accordance with the guidelines defined in USB standards, the USB
port on this device is not isolated. To prevent damage to a connected
PC or laptop, the DECS-250N must be properly tied to ground.