Metrohm 900 Touch Control Manual - Manual (Page 79)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Reagents
900 Touch Control
￭￭￭￭￭￭￭￭ 63
If one of the following values is reached, then the reagent must be
replaced. The values are checked in the following cases:
￭ at the start of the determination.
￭ at the end of the determination.
Number of determ.
The number of determinations to be carried out with a certain amount of
reagent depends on the type of sample and its amount.
Input range 1 - 999
Selection off
Default value off
Working life
Working life of the reagent.
Input range 1 - 999 days
Selection off
Default value off
Volume
This parameter is only visible for volumetric reagents.
Volume of titrant dosed.
Input range 1.0 - 999.9 mL
Selection off
Default value off
Reagent capacity
This parameter is only visible with coulometric reagents.
Water capacity of the reagent.
Input range 1 - 9999 mg