Metrohm 900 Touch Control Manual - Manual (Page 44)

7.3 User administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭
900 Touch Control
All deactivated functions will appear grayed-out, i.e. they are inac-
tive.
7.3 User administration
Main dialog: System ▶ System settings ▶ User admin.
All of the functions of the user administration are described in this chap-
ter. No user administration is mandatory for the simple operation of a
titration system. If, however, you wish to be in compliance with FDA
guideline 21 CFR Part 11, then you must use the functions of the user
administration. Additional information regarding the requirements of the
FDA guideline can be found in the Titrando Compliance Guide.
NOTE
If you work with the login function activated, then the user administra-
tion is accessible only for users with administrator rights. This means
that you must ensure that at least two users have administrator rights
so at least one of them will be available. Keep the access rights for a
user with administrator rights in a safe place so that they are accessible
in an emergency.
The following data is displayed in the user list for each user:
￭ Name
￭ Dialog mode in which the user may operate the system.
￭ Status
You can use the user list two different ways: