Metrohm 900 Touch Control Manual - Manual (Page 264)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
248 ￭￭￭￭￭￭￭￭
900 Touch Control
28 Manual control
The following functions are available in the manual control:
[Measure]
Carrying out manual measurements (see Chapter 28.2, page 250).
Measuring modes:
￭ pH (potentiometric pH measurement)
￭ U (potentiometric voltage measurement)
￭ Ipol (voltametric measurement with selectable polarization current)
￭ Upol (amperometric measurement with selectable polarization voltage)
￭ T (temperature measurement)
￭ Conc (concentration measurement)
￭ Cond (conductivity measurement)
[Dosing]
Dosing manually (see Chapter 28.3, page 254).
The following dosing functions are available:
￭ Preparing the exchange or dosing unit
￭ Emptying the dosing unit
￭ Filling the dosing cylinder of the exchange / dosing unit
￭ Dosing a specified volume
￭ Dosing continuously
[Conditioning]
Conditioning the volumetric or coulometric titration cell manually (see
Chapter 28.5, page 264).
[Stir]
Controlling the stirrer manually (see Chapter 28.4, page 263).