Metrohm 900 Touch Control Manual - Manual (Page 149)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
13 GLP manager
900 Touch Control
￭￭￭￭￭￭￭￭ 133
13.4 System validation
Main dialog: System ▶ GLP manager ▶ System validation
In the dialog GLP manager / System validation and its subdialogs, you
can document the system validation results and define the time interval
after which validation must be carried out again.
Proceed as follows:
1 Open the properties dialog
￭ In the dialog System / GLP manager, tap on the button [Sys-
tem validation].
2 Edit data
￭ Define the method, the result, etc. (see "Dialog "GLP manager /
System validation"", page 134).
3 Define the validation interval
￭ Tap on [Validation interval].
￭ Enter the time interval or the date for the next system validation
(see "Dialog "System validation / Validation interval"", page
135).
￭ Tap on the fixed key [ ].
The dialog GLP manager / System validation appears again.
4 Enter statistical data
￭ Tap on [Test statistics].
￭ Enter the statistical data for the last system validation (see "Dialog
"System validation / Test statistics"", page 136).