Metrohm 900 Touch Control Manual - Manual (Page 518)

32.8 Using AuditTrailViewer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
502 ￭￭￭￭￭￭￭￭
900 Touch Control
32.8.4 Filtering the Audit Trail
The entries in the Audit Trail can be filtered. You can set the following fil-
ter criteria:
￭ Date
￭ User
￭ Category
￭ Action
Proceed as follows:
1 Click in a cell that contains the desired filter criterion (e.g. Category
= Method).
2 Click on the symbol or menu item Filter ▶ Quick filter.
The only entries which will be displayed are those which correspond
to the desired filter criterion.
3 Click on the symbol or menu item Filter ▶ Show all.
All of the entries are displayed once again.
32.8.5 Exporting the Audit Trail
You can export the Audit Trail as .txt file. This way, the Audit Trail can be
archived and is available as required for inspections.
Proceed as follows:
1 Use the menu item File ▶ Export to open the dialog window for the
export.
2 Enter the path and file name with the extension .txt.
3 Click on [Open] and then on [Export].
The Audit Trail is exported.