Metrohm 900 Touch Control Manual - Manual (Page 196)

16.5 Method options
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
180 ￭￭￭￭￭￭￭￭
900 Touch Control
[Sign]
Sign the method or determination. This button is active only when work-
ing with activated login function and password (see Chapter 17.1, page
182).
16.5.5 Note
Main dialog: Edit parameters ▶ Method options ▶ Note
In this dialog, you can enter a short text, e.g. important information about
carrying out the determination.
[Display options]
Definition when the note is being displayed.
Automatically after loading the method
on | off (Default value: off)
If this parameter is activated, the note is displayed when loading the
method. It can otherwise only be read in this dialog.
16.5.6 Saving a determination automatically
Main dialog: Edit parameters ▶ Method options ▶ Save automat.
In the dialog Method options / Save automatically, you can specify
whether the determination is to be saved automatically and/or whether a
PC/LIMS report is to be created.
Save determination automatically
on | off (Default value: off)
If this parameter is activated, then the determination will be saved auto-
matically.
Memory
Memory location where the determination will be saved.
Selection External memory 1 | External memory 2 |
Shared memory
Default value External memory 1
Shared memory
The determination will be saved in a shared directory on the network.
The shared directory is selected in the Edit device / Shared memory
dialog (see Chapter 11.3.3, page 84).
Group
Directory where the determination will be saved.
Entry 32 characters maximum