Metrohm 900 Touch Control Manual - Manual (Page 279)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Manual control
900 Touch Control
￭￭￭￭￭￭￭￭ 263
28.4 Stirring
Manual control ▶ Stir
The MSB connector and type of stirrer is indicated for each connected stir-
rer.
You can control a connected stirrer manually with the function [Stir].
Proceed as follows:
1 Set the stirring rate
￭ Tap on the button [–] or [+].
Each time one of the buttons is tapped, the stirring rate is
reduced or increased by one level.
2 Switch on the stirrer
￭ Tap on [Start].
The stirrer is started.
3 Switch off the stirrer
￭ Tap on [Stop].
The stirrer is stopped.
Parameter description
Stirring rate
Setting the stirring rate. It can be set in steps of –15 to +15. The default
setting 8 corresponds to 1000 rpm. The formula for calculating the rota-
tional speed is specified in chapter 32.3, page 489.