Metrohm 900 Touch Control Manual - Manual (Page 282)

28.7 USB Sample Processor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
266 ￭￭￭￭￭￭￭￭
900 Touch Control
Entering the bit pattern:
￭ 0 = line inactive
￭ 1 = line active
￭ * = retain line status
￭ p = set pulse
The output lines are always numbered from right to left, i.e. with the sig-
nal 00000000000001 line 0 is set. With a pulse, the length is set to 200
ms. If you wish to set pulses with other lengths, you have to define a cor-
responding template.
Entry Bit pattern containing exactly 14 characters
or a max. of 24 characters for the name of
the template
Default value 00000000000001
Selection Selection of the templates defined
[Set]
Set a defined output signal.
28.7 USB Sample Processor
Manual control ▶ Sample Processor
With the function [Sample Processor], you can control a connected
Sample Processor manually. The following functions are available:
￭ Moving a sample rack
￭ Moving the lift
￭ Defining specific lift positions (work position, rinse position, etc.)
￭ Switching pumps on and off
￭ Initializing the rack
￭ Defining external positions outside of the sample rack (only with Swing
Head)