Metrohm 900 Touch Control Manual - Manual (Page 116)

11.6 Sample racks
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
100 ￭￭￭￭￭￭￭￭
900 Touch Control
Loading the sample rack
When you receive the file for a new sample rack from your Metrohm rep-
resentative, you can easily import this file into your existing system. Pro-
ceed as follows:
1 Copy file to an external storage medium
￭ Copy the file to a sub-directory of "Files".
If this structure is not maintained, the new rack will not be found
because the software directly accesses subdirectories of "Files".
￭ Plug in the external storage medium at the Touch Control.
2 Display the list of saved sample racks
￭ In the dialog Edit device / Sample racks, tap on the button
[Load].
The selection of file groups on the external storage medium is dis-
played. If only one group is available, then the list of the saved
sample rack files will be displayed directly.
￭ Select the group with the desired sample rack.
￭ Tap on [Show files].
The list with the saved sample rack files is opened.
3 Load the sample rack file
￭ Select the desired file.
￭ Tap on [Load].
The new sample rack is now loaded and appears in the list of avail-
able racks.