Metrohm 900 Touch Control Manual - Manual (Page 25)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Overview of the instrument
900 Touch Control
￭￭￭￭￭￭￭￭ 9
5 4
3 2 1
Figure 2 Rear 900 Touch Control
1 Ethernet connector (RJ-45)
For connecting to a network. 2 USB connector (type A)
For connecting printers, USB sticks, USB
hubs, etc.
3 Power switch
Switches the instrument on/off. 4 Type plate
Contains the serial number.
5 Connection cable
For the connection of the Touch Control to
a control device (socket "Controller").