Metrohm 900 Touch Control Manual - Manual (Page 271)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Manual control
900 Touch Control
￭￭￭￭￭￭￭￭ 255
[All dosing devices]
Carrying out the functions [Prepare], [Empty] and [Fill] at the same time
with several dosing devices of the control device.
Selecting the dosing function
If only one dosing device is connected, then the properties of this dosing
device will be shown directly. This information varies according to the type
of dosing device:
￭ Type 8XX with integrated data chip:
If an exchange or dosing unit with integrated data chip is attached, the
data stored on the data chip is displayed.
￭ Type 8XX without integrated data chip:
If an exchange unit without integrated data chip is attached, then the
titrant can be selected from the titrant list. We recommend always
selecting the titrant. This ensures that the parameters defined for the
titrant for the preparing are used. Titrants are defined under Sys-
tem
▶ Titrants.