Metrohm 900 Touch Control Manual - Manual (Page 104)

11.4 Metrohm control devices
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
88 ￭￭￭￭￭￭￭￭
900 Touch Control
The following properties can be displayed and edited to a certain extent:
￭ Properties of the control device (see Chapter 11.4.1, page 88)
￭ Properties of the measuring inputs (see Chapter 11.4.2, page 88)
This dialog is available only for devices which have a built-in measuring
input.
￭ Properties of the MSB connectors (see Chapter 11.4.3, page 90)
￭ Properties of the peripheral devices on the MSB connector (see Chap-
ter 11.4.4, page 91)
11.4.1 Properties – Control device
List of devices: Control device ▶ Edit ▶ Properties
Device name
This designation is used for identification purposes when selecting control
devices (command, manual control).
Entry 24 characters maximum
Comment
Entry 24 characters maximum
Program version
Program version of the instrument software.
Serial number
Shows the serial number of the device.
11.4.2 Properties – Measuring input
List of devices: Control device ▶ Edit ▶ Measuring input 1/2 ▶ Prop-
erties