Metrohm 900 Touch Control Manual - Manual (Page 100)

11.3 Touch Control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
84 ￭￭￭￭￭￭￭￭
900 Touch Control
created the first time a PC/LIMS report is generated. All three memory
locations are listed as possible selections, even if they cannot be accessed
at the moment.
Selection off | External memory 1 | External memory 2 |
Shared memory
Default value off
off
The report will not be saved as a TXT file.
Shared memory
The report will be saved in a shared directory on the network. The
shared directory is selected in the Edit device / Shared memory dia-
log (see Chapter 11.3.3, page 84).
RS-232
The RS-232 interface via which the PC/LIMS report is sent. The interface
parameters are adjusted in the Edit device / Port parameters dialog
(see Chapter 11.9, page 114).
Selection off | COM 1 | COM 2
Default value off
off
The report will not be sent via an RS-232 interface.
COM 2
This interface is inactive.
Coding
Format in which the PC/LIMS report is coded and stored.
Selection ISO 8859-1 | UTF-8
Default value ISO 8859-1
ISO 8859-1
This format is recommended for all languages that use the extended
ASCII code (e.g. German, English, Spanish, etc.).
UTF-8
This format is required for all languages that do not use the extended
ASCII code (e.g. Russian, Chinese, Korean, etc.).
11.3.3 Shared memory
900 Touch Control: Edit ▶ Shared memory
If you have your Touch Control connected to your network, then you can
specify in this dialog a shared memory location on a PC within your net-
work for the purpose of saving data (methods, determinations, etc.).