Metrohm 900 Touch Control Manual - Manual (Page 55)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 System settings
900 Touch Control
￭￭￭￭￭￭￭￭ 39
[Edit]
Change the designation of the selected reason.
7.3.7 Audit Trail
Main dialog: System ▶ System settings ▶ User admin. ▶ Login
options ▶ Audit Trail
An Audit Trail is an automatically generated log of all user activities. An
Audit Trail contains precise logs of user actions (date, time, user, action,
etc.). Recording an Audit Trail is important for compliance with FDA
guideline 21 CFR Part 11 when using PC programs. A step-by-step
description of how you must proceed to remain in compliance with the
FDA guideline is included in the Titrando Compliance Guide. The Audit
Trail is saved to the internal memory.
You can also use the Audit Trail function specifically to record the data
which are of interest to you.
You can view, filter and export the Audit Trail on a PC with the supplied
software program AuditTrailViewer. Details concerning utilization of the
AuditTrailViewer can be found in the Appendix (chapter 32.8, page 498).
If necessary, you can delete all of the entries in the Audit Trail with
[Delete Audit Trail]. Do not fail to create a backup before doing so,
however.
Security log
on | off (Default value: off)
If this option is activated, then the following events will be recorded: user
login/logout, password changes, automatic deactivation of users and mes-
sages displayed during the login procedure.
User administration log
on | off (Default value: off)
If this option is activated, then all changes with respect to user administra-
tion will be recorded (modifying user list/user data, changing login
options, etc.).
Method log
on | off (Default value: off)
If this option is activated, then all changes with respect to methods and
determinations will be recorded (saving, deleting, renaming, copying and
loading methods; editing method parameters; starting, stopping, pausing
determinations).