Metrohm 900 Touch Control Manual - Manual (Page 107)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
11 Device manager
900 Touch Control
￭￭￭￭￭￭￭￭ 91
Input range 0.1 - 999.9 h
Default value 12.0 h
11.4.4 Properties – Peripheral devices
List of devices: Control device ▶ Edit ▶ Peripheral device ▶ Proper-
ties
The following data is displayed for the connected dosing devices and stir-
rers:
￭ Type
The display includes the device number, e.g. "800" (Dosino) or "804"
(Ti Stand)
￭ Serial number
In the case of the 700 Dosino and the 685 Dosimat, the serial number
cannot be read out.
11.5 USB Sample Processor
NOTE
The following settings apply to all USB Sample Processors.
The dialog shows the USB Sample Processor with its tower (or towers), the
MSB connectors and connected peripheral devices (dosing unit, stirrer,
Remote Box). If the control device is not connected, then the properties
dialog of the control device will be displayed directly (see Chapter 11.5.1,
page 92).
The settings of the MSB connectors and the connected peripheral devices
are described in Chapter "Properties – MSB connector", page 90.