H3C Technologies H3C S3100 Series Switches - Manual (Page 99)

Operation Manual – VLAN
H3C S3100-52P Ethernet Switch Chapter 2 VLAN Configuration
2-1
Chapter 2 VLAN Configuration
2.1 VLAN Configuration
2.1.1 Basic VLAN Configuration
Table 2-1
Basic VLAN configuration
Operation Command Description
Enter system view system-view —
Create multiple
VLANs in batch
vlan
{ vlan-id1 to vlan-id2 |
all
}
Optional
Create a VLAN and
enter VLAN view
vlan
vlan-id
Required
The vlan-id argument ranges
from 1 to 4,094.
Assign a name for
the current VLAN
name text
Optional
By default, the name of a VLAN
is its VLAN ID.
Specify the
description string of
the current VLAN
description text
Optional
By default, the description string
of a VLAN is its VLAN ID.
Caution:
When you use the vlan command to create VLANs, if the destination VLAN is an
existing dynamic VLAN, it will be transformed into a static VLAN and the switch will
output the prompt information.
2.1.2 Basic VLAN Interface Configuration
I. Configuration prerequisites
Create a VLAN before configuring a VLAN interface.