H3C Technologies H3C S3100 Series Switches User Manual
Page 602
Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Chapter 4 Device Management
4-5
Note:
Refer to the Chapter “Logging into an Ethernet Switch” for configuration commands
and steps about telnet user.
# Execute the telnet command on the PC to log into the switch. The following prompt
appears:
Caution:
If the Flash memory of the switch is not sufficient, delete the original applications in it
before downloading the new ones.
# Initiate an FTP connection with the following command in user view. Input the correct
user name and password to log into the FTP server.
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Enter the authorized path on the FTP server.
[ftp] cd switch
# Execute the get command to download the switch.bin and boot.btm files on the FTP
server to the Flash memory of the switch.
[ftp] get switch.bin
[ftp] get boot.btm
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
# Update the BootROM.