H3C Technologies H3C S3100 Series Switches - Manual (Page 48)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 2 Logging in through the Console Port
2-14
Operation Command Description
Configure to authenticate
users locally or remotely
authentication-mod
e scheme
[
command-
authorization
]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
Users are authenticated locally
by default.
Set the
baud rate
speed
speed-value
Optional
The default baud rate of the
AUX port (also the Console
port) is 9,600 bps.
Set the
check mode
parity
{ even | none |
odd
}
Optional
By default, the check mode of a
Console port is set to none,
that is, no check bit.
Set the stop
bits
stopbits
{ 1 | 1.5 | 2 }
Optional
The default stop bits of a
Console port is 1.
Configure
the
Console
port
Set the data
bits
databits
{ 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the command
level available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of level
3 are available to users logging
into the AUX user interface.
Make terminal services
available to the user
interface
shell
Optional
By default, terminal services
are available in all user
interfaces.
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
Set history command
buffer size
history-command
max-size
value
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.