H3C Technologies H3C S3100 Series Switches - Manual (Page 49)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 2 Logging in through the Console Port
2-15
Operation Command Description
Set the timeout time for
the user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if
no operation is performed in
the user interface within 10
minutes.
You can use the idle-timeout 0
command to disable the
timeout function.
Note that the command level available to users logging into a switch depends on both
the authentication-mode scheme [ command-authorization ] command and the
service-type
terminal [ level level ] command, as listed in Table 2-9.
Table 2-9
Determine the command level
Scenario
Authentication
mode
User type Command
Command level
The
service-type
terminal
command does
not specify the available
mand level. com
Level 0
The default
command level of
local users is level 0. authentication
-mode scheme
[ command-au
thorization
]
Users
logging into
the Console
port and
passing
AAA&RADI
US or local
authenticati
on
The
service-type
terminal
command
specifies the available
command level.
Determined by the
command level
specified by the
service-type
terminal
command
2.6.2 Configuration Example
I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
z
Configure the name of the local user to be “guest”.
z
Set the authentication password of the local user to 123456 (in plain text).
z
Set the service type of the local user to Terminal.
z
Configure to authenticate users logging in through the Console port in the scheme
mode.