H3C Technologies H3C S3100 Series Switches - Manual (Page 438)

Operation Manual – Cluster
H3C S3100-52P Ethernet Switch Chapter 1 Cluster
1-15
Table 1-16
Access shared FTP/TFTP server from a member device
Operation Command Description
Access the shared FTP
server of the cluster
ftp cluster
Optional
Download a file from the
shared TFTP server of the
cluster
tftp cluster get source-file
[ destination-file ]
Optional
Upload a file to the shared
TFTP server of the cluster
tftp cluster put source-file
[ destination-file ]
Optional
1.4 Cluster Member Configuration
Table 1-17
Cluster member configuration
Operation Command Description
Enter system view system-view —
Enter cluster view
cluster
—
Add a candidate
device to the
cluster
add-member
[
member-number
]
mac-address H-H-H
[ password password ]
Optional
Remove a member
device from the
cluster
delete-member
member-number
Optional
Reboot a specified
member device
reboot member
{ member-number |
mac-address H-H-H
}
[ eraseflash ]
Optional
Return to system
view
quit
—
Return to user view quit —
Switch between
management
device and
member device
cluster switch-to
{
member-number
|
mac-address H-H-H
|
administrator
}
Optional
You can use this command
switch to the view of a
member device and switch
back.
1.5 Displaying and Maintaining Cluster Configuration
After the above configuration, you can execute the display command in any view to
display the configuration and running status of cluster, so as to verify your
configuration.