H3C Technologies H3C S3100 Series Switches - Manual (Page 133)

Operation Manual – Port Basic Configuration
H3C S3100-52P Ethernet Switch Chapter 1 Port Basic Configuration
1-11
Table 1-13
Set the interval to perform statistical analysis on port traffic
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the interval to perform
statistical analysis on port
traffic
flow-interval interval
Optional
By default, this interval
is 300 seconds.
1.2.12 Enabling Giant-Frame Statistics Function
The giant-frame statistics function is used to ensure transmission of network traffic and
to facilitate statistics and analysis of unusual traffic on the network.
Table 1-14
Enable the giant-frame statistics function
Operation Command Description
Enter system view
system-view
—
Enable the
giant-frame statistics
function
giant-frame
statistics enable
Optional
By default, the giant-frame
statistics function is not enabled.
1.2.13 Displaying Basic Port Configuration
After the above configurations, you can execute the display commands in any view to
display information about Ethernet ports, so as to verify your configurations.
You can execute the reset counters command in user view to clear the statistics of
Ethernet ports.