H3C Technologies H3C S3100 Series Switches - Manual (Page 535)

Operation Manual – FTP and TFTP
H3C S3100-52P Ethernet Switch Chapter 1 FTP and TFTP Configuration
1-3
Switch PC
Network Network
Switch PC
Network Network
Figure 1-1
Network diagram for FTP configurations
The following configurations are performed on the FTP server:
z
Creating local users
z
Setting local user passwords
z
Setting the password display mode for the local users
z
Configuring service types for the local users
For commands used in these configurations, refer to the “AAA-RADIUS-HWTACACS”
module of this manual for: local-user, local-user password-display-mode,
password
, and service-type.
II. Configuration procedure
Table 1-3
Configure an FTP server
Operation Command Description
Enter system view
system-view
—
Enable the FTP server
function
ftp server enable
Required
By default, the FTP server
function is disabled.
Set the connection idle
time
ftp
timeout minutes
Optional
The default connection
idle time is 30 minutes.