H3C Technologies H3C S3100 Series Switches - Manual (Page 624)

Operation Manual – DNS
H3C S3100-52P Ethernet Switch Chapter 1 DNS Configuration
1-3
1.2 Configuring Static Domain Name Resolution
Table 1-1
Configure static domain name resolution:
Operation Command Description
Enter system
view
system-view —
Create a
hostname to IP
address mapping
entry
ip host hostname
ip-address
Required
No IP address is assigned to the
host name by default.
Note:
The last IP address you assigned to the host name can overwrite the old one if there is
any.
You may create up to 50 entries for the domain name resolution.
1.3 Configuring Dynamic Domain Name Resolution
1.3.1 Configuration Procedure
Table 1-2
Configure dynamic domain name resolution:
Operation Command Description
Enter the system view
system-view
—
Enable dynamic domain
name resolution
dns resolve
Required
Disabled by default
Configure an IP address to
the DNS Server
dns server ip-address
Required
No IP address is
assigned by default.
Configure DNS suffixes
dns domain
domain-name
Optional
No DNS suffix by default
Note:
You may configure up to 6 DNS Servers and 10 DNS suffixes.