H3C Technologies H3C S3100 Series Switches - Manual (Page 460)

Operation Manual – SNMP and RMON
H3C S3100-52P Ethernet Switch Chapter 2 RMON Configuration
2-5
Table 2-2
Display RMON
Operation Command Description
Display RMON
statistics
display rmon statistics
[ interface-type interface-number |
unit
unit-number ]
Display RMON
history information
display rmon history
[ interface-type interface-number |
unit
unit-number ]
Display RMON
alarm information
display rmon alarm
[ entry-number ]
Display extended
RMON alarm
information
display rmon prialarm
[ prialarm-entry-number ]
Display RMON
events
display rmon event
[ event-entry ]
Display RMON
event logs
display rmon eventlog
[ event-entry ]
These commands
can be executed in
any view.
2.4 RMON Configuration Example
I. Network requirements
z
Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
z
The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to generate statistics on the Ethernet port performance for
network management.
II. Network diagram
Internet
Console Port
Switch
Inte
Network Port
rnet
Internet
Console Port
Switch
Inte
Network Port
rnet
Figure 2-1 Network diagram for RMON configuration