H3C Technologies H3C S3100 Series Switches - Manual (Page 21)

Operation Manual – CLI
H3C S3100-52P Ethernet Switch Chapter 1 CLI Configuration
1-4
z
Layer 2 ACL view
z
User-defined ACL view
z
QoS profile view
z
RADIUS scheme view
z
ISP domain view
z
HWPing view
z
HWTACACS view
z
MSDP view
z
PoE profile view
Table 1-4 lists operations you can perform in these CLI views and details about
commands used to enter these CLI views.
Table 1-4
Operations in CLI views
View
Available
operation
Prompt Enter method Quit method
User view
Display
operation
status and
statistical
information
Enter user view
once logging in
to the switch.
Execute the quit
command in user
view to log out of the
switch.
System
view
Configure
system
parameters
[H3C]
Execute the
system-view
command in
user view.
Execute the quit or
return
command to
return to user view.
[H3C-Ether
net1/0/1]
100M Ethernet
interface view
Execute the
interface
ethernet
1/0/1
command in
system view.
Ethernet
interface
view
Configure
Ethernet
interface
parameters
[H3C-Gigab
itEthernet1/
1/1]
Gigabit
Ethernet
interface view
Execute the
interface
gigabitetherne
t
1/1/1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
VLAN
view
Configure
VLAN
parameters
[H3C-vlan1]
Execute the
vlan
1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.