H3C Technologies H3C S3100 Series Switches - Manual (Page 508)

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch Chapter 1 SSH Terminal Service
1-22
II. Network diagram
PC
IP address: 10.165.87.136
SSH Client
Switch B
SSH Server
Switch A
PC
SSH Client
Switch B
SSH Server
Switch A
PC
IP address: 10.165.87.136
SSH Client
Switch B
SSH Server
Switch A
PC
Switch B
SSH Server
SSH Client
Switch A
n
Figure 1-13
Network diagram for SSH client configuratio
III. Configuration procedure
1) Enable the client to run initial authentication.
[H3C] ssh client first-time enable
2) Configure the server's public key on the client.
[H3C] rsa peer-public-key public
[H3C-rsa-public-key] public-key-code begin
[H3C-rsa-key-code] 308186028180739A291ABDA704F5D93DC8FDF84C427463
[H3C-rsa-key-code] 1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[H3C-rsa-key-code] D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[H3C-rsa-key-code] 0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[H3C-rsa-key-code] C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[H3C-rsa-key-code] BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[H3C-rsa-key-code] public-key-code end
[H3C-rsa-public-key] peer-public-key end
[H3C] ssh client 10.165.87.136 assign rsa-key public
3) Start SSH Client.
Settings for the two authentication types are described respectively in the following:
z
Password authentication
# Start SSH Client with default encryption algorithms.
[H3C] ssh2 10.165.87.136
username: client003
Trying 10.165.87.136
Press CTRL+K to abort
Connected to 10.165.87.136...
The Server is not autherncated.Do you continue access it?(Y/N):y