H3C Technologies H3C S3100 Series Switches - Manual (Page 128)

Operation Manual – Port Basic Configuration
H3C S3100-52P Ethernet Switch Chapter 1 Port Basic Configuration
1-6
1.2.5 Configuring Hybrid Port Attribute
Table 1-7
Configure hybrid port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Set the link type of the
port to hybrid
port link-type
hybrid Required
Set the default VLAN
ID for the hybrid port
port hybrid pvid vlan
vlan-id
Optional
If no default VLAN ID is set
for a hybrid port, VLAN 1
(system default VLAN) is
used as the default VLAN of
the port.
Add the current hybrid
port to a specified
VLAN
port hybrid vlan
vlan-id-list
{ tagged |
untagged
}
Optional
For a hybrid port, you can
configure whether the
system keeps VLAN tags
when the packets of the
specified VLANs are
forwarded on this port.
1.2.6 Configuring Trunk Port Attribute
Table 1-8
Configure trunk port attribute
Operation Command Remarks
Enter system view
System-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the link type of the port to
trunk
port link-type
trunk Required
Set the default VLAN ID for
the trunk port
port trunk pvid vlan
vlan-id
Optional
If no default VLAN ID is
set for a trunk port,
VLAN 1 (system
default VLAN) is used
as the default VLAN of
the port.
Add the current trunk port to
a specified VLAN
port trunk permit vlan
{ vlan-id-list | all }
Optional