H3C Technologies H3C S3100 Series Switches - Manual (Page 327)

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-28
Operation Command Description
Set the status of the
primary RADIUS
authentication/authorizatio
n server
state primary
authentication
{ block |
active
}
Set the status of the
primary RADIUS
accounting server
state primary
accounting
{ block |
active
}
Set the status of the
secondary RADIUS
authentication/authorizatio
n server
state secondary
authentication
{ block |
active
}
Set the status of the
secondary RADIUS
accounting server
state secondary
accounting
{ block |
active
}
Optional
By default, the primary
RADIUS servers in the
default RADIUS scheme
"system" are in the active
state, the secondary
servers in the scheme are
in the block state, and all
RADIUS servers in all
other RADIUS schemes
are in the block state.
1.4.8 Configuring the Attributes for Data to be Sent to RADIUS Servers
Table 1-19
Configure the attributes for data to be sent to RADIUS servers
Operation Command Description
Enter system view
system-view
—
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS
scheme named "system"
has already been created
in the system.
Set the format of the user
names to be sent to
RADIUS server
user-name-format
{
with-domain
|
without-domain
}
Optional
By default, the user
names sent from the
switch to RADIUS server
carry ISP domain names.
Set the units of data flows
to RADIUS servers
data-flow-format data
{ byte | giga-byte |
kilo-byte
| mega-byte }
packet
{ giga-packet |
kilo-packet
| mega-
packet
| one-packet }
Optional
By default, in a RADIIUS
scheme, the data unit and
packet unit for outgoing
RADIUS flows are byte
and one-packet
respectively.