H3C Technologies H3C S3100 Series Switches - Manual (Page 338)

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-39
Caution:
z
To control the interval at which users are charge in real time, you can set the
real-time accounting interval. After the setting, the switch periodically sends online
users' accounting information to the TACACS server at the set interval.
z
The real-time accounting interval must be a multiple of 3.
z
The setting of real-time accounting interval somewhat depends on the performance
of the TACACS client and server devices: A shorter interval requires higher device
performance.
1.6 Displaying and Maintaining AAA & RADIUS &
HWTACACS Information
After the above configurations, you can execute the display commands in any view to
view the configuration result and operation status of AAA, RADIUS and HWTACACS
and verify your configuration.
You can use the reset command in user view to clear the corresponding statistics.
Table 1-31
Display AAA information
Operation Command Description
Display configuration
information about one
specific or all ISP
domains
display domain
[ isp-name ]
Display information about
user connections
display
connection [ access-type
{ dot1x | mac-authentication } |
domain
isp-name | interface
interface-type interface-number
| ip
ip-address
| mac mac-address |
radius-scheme
radius-scheme-name
|
hwtacacs-scheme
hwtacacs-scheme-name
| vlan
vlan-id
| ucibindex ucib-index |
user-name user-name
]
Display information about
local users
display local-user
[ domain
isp-name
| idle-cut { disable |
enable
} | vlan vlan-id | service-type
{ ftp | lan-access | ssh | telnet |
terminal
} | state { active | block } |
user-name
user-name ]
You can
execute the
display
command in
any view.