H3C Technologies H3C S3100 Series Switches - Manual (Page 408)

Operation Manual – QoS
H3C S3100-52P Ethernet Switch Chapter 1 QoS Configuration
1-15
weight of queue 1: 2
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 9
weight of queue 6: 13
weight of queue 7: 15
1.8 Displaying QOS Configuration
After finishing the configurations mentioned above, you can execute the display
command in any view to check the running state of the QoS profile after the
configuration. You can verify the effect of the configuration by checking the information
on display.
Table 1-12
Display the QoS configuration
Operation Command Description
Display the
configuration of protocol
packet precedence
display protocol-priority
Display the Mapping
between 802.1p Priority
and Queues
display qos
cos-local-precedence-map
Display all QoS
configurations on a port
or all ports
display qos-interface
{interface-type interface-number |
unit-id
} all
Display the rate limit
configuration
display qos-interface
{ interface-type interface-number |
unit-id
} line-rate
Display the global
queue scheduling
configuration
display queue-scheduler
You can
execute the
display
command in any
view