H3C Technologies H3C S3100 Series Switches - Manual (Page 53)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 3 Logging in through Telnet
3-2
Configuration Description
Make terminal services
available
Optional
By default, terminal services are
available in all user interfaces
Set the maximum number
of lines the screen can
contain
Optional
By default, the screen can contain up
to 24 lines.
Set history command
buffer size
Optional
By default, the history command
buffer can contain up to 10
commands.
VTY terminal
configuration
Set the timeout time of a
user interface
Optional
The default timeout time is 10
minutes.
3.1.2 Telnet Configurations for Different Authentication Modes
Table 3-3 lists Telnet configurations for different authentication modes.
Table 3-3
Telnet configurations for different authentication modes
Authentication
mode
Telnet configuration Description
None
Perform
common
configuration
Perform
common
Telnet
configuration
Optional
Refer to Table 3-2.
Configure
the
password
Configure the
password for
local
authenticatio
n
Required
Password
Perform
common
configuration
Perform
common
Telnet
configuration
Optional
Refer to Table 3-2.