H3C Technologies H3C S3100 Series Switches - Manual (Page 43)

Operation Manual – Login
H3C S3100-52P Ethernet Switch Chapter 2 Logging in through the Console Port
2-9
[H3C] user-interface aux 0
# Specify not to authenticate users logging in through the Console port.
[H3C-ui-aux0] authentication-mode none
# Specify commands of level 2 are available to users logging into the AUX user
interface.
[H3C-ui-aux0] user privilege level 2
# Set the baud rate of the Console port to 19,200 bps.
[H3C-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[H3C-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[H3C-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[H3C-ui-aux0] idle-timeout 6
2.5 Console Port Login Configuration with Authentication
Mode Being Password
2.5.1 Configuration Procedure
Table 2-6
Console port login configuration with the authentication mode being
password
Operation Command Description
Enter system view
system-view
—
Enter AUX user
interface view
user-interface aux
0
—
Configure to
authenticate users
using the local
password
authentication-mo
de password
Required
By default, users logging into a
switch through the Console port
are not authenticated; while those
logging in through Modems or
Telnet are authenticated.
Set the local password
set authentication
password
{ cipher |
simple
} password
Required