Ii. network diagram, Iii. configuration procedure – H3C Technologies H3C S3100 Series Switches User Manual
Page 544
Operation Manual – FTP and TFTP
H3C S3100-52P Ethernet Switch
Chapter 1 FTP and TFTP Configuration
1-12
II. Network diagram
Switch
PC
Network
Network
Switch
PC
Network
Network
Figure 1-3
Network diagram for FTP configurations
III. Configuration procedure
1) Perform FTP server–related configurations on the PC, that is, create a user
account on the FTP server with user name “switch” and password “hello”. (For
detailed configuration, refer to the configuration instruction relevant to the FTP
server software.)
2) Configure the switch.
# Log into the switch. (You can log into a switch through the Console port or by
Telneting to the switch. See the “Login” module for detailed information.)
Caution:
If available space on the Flash memory of the switch is not enough to hold the file to be
uploaded, you need to delete files from the Flash memory to make room for the file.
# Connect to the FTP server using the ftp command in user view. You need to provide
the IP address of the FTP server, the user name and the password as well.
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Enter the authorized directory on the FTP server.