H3C Technologies H3C S3100 Series Switches - Manual (Page 121)

Operation Manual – GVRP
H3C S3100-52P Ethernet Switch Chapter 1 GVRP Configuration
1-7
1.4.3 Configuration procedure
z
Configure switch A.
# Enable GVRP globally.
system-view
[H3C] gvrp
GVRP is enabled globally.
# Configure Ethernet1/0/1 to be a trunk port and to permit the packets of all the VLANs.
[H3C] interface Ethernet 1/0/1
[H3C-Ethernet1/0/1] port link-type trunk
[H3C-Ethernet1/0/1] port trunk permit vlan all
# Enable GVRP on the trunk port.
[H3C-Ethernet1/0/1] gvrp
GVRP is enabled on port Ethernet1/0/1.
z
Configure switch B.
# Enable GVRP globally.
system-view
[H3C] gvrp
GVRP is enabled globally.
# Configure Ethernet1/0/2 to be a trunk port and to permit the packets of all the VLANs.
[H3C] interface Ethernet 1/0/2
[H3C-Ethernet1/0/2] port link-type trunk
[H3C-Ethernet1/0/2] port trunk permit vlan all
# Enable GVRP on the trunk port.
[H3C-Ethernet1/0/2] gvrp
GVRP is enabled on port Ethernet1/0/2.