H3C Technologies H3C S3100 Series Switches - Manual (Page 249)

Operation Manual – Multicast
H3C S3100-52P Ethernet Switch Chapter 2 IGMP Snooping Configuration
2-12
Operation Command Description
port hybrid vlan
vlan-id-list
{ tagged |
untagged
}
Specify the VLANs to be
allowed to pass through
the Ethernet
port
trunk pvid vlan
vlan-list
Required
The multicast VLAN
defined on the Layer 2
switch must be included
and set as tagged.
Table 2-12
Configure multicast VLAN on Layer 2 switch
Operation Command Description
Enter system view
system-view
—
Enable IGMP Snooping
globally
igmp-snooping enable
Required
Enter VLAN view
vlan
vlan-id
vlan-id
is a VLAN ID.
Enable IGMP Snooping
on the VLAN
igmp-snooping enable
Required
By default, the IGMP
Snooping feature is
disabled
Enable multicast VLAN
service-type multicast
Required
Exit VLAN view
quit
—
Enter the view of the
Ethernet port connected
to the Layer 3 switch
interface
interface-type
interface-number
—
Define the port as a trunk
or hybrid port
port link-type
{ trunk |
hybrid
}
—
port
hybrid vlan vlan-list
{ tagged | untagged } Specify the VLANs to be
allowed to pass through
the Ethernet port
trunk pvid vlan
vlan-list
The multicast VLAN must
be included and set as
tagged.
Enter the view of the
Ethernet port connected
to a user device
interface
interface-type
interface-number
—
Define the port as a hybrid
port
port link-type
hybrid Required
Specify the VLANs to be
allowed to pass the port
port hybrid vlan
vlan-id-list
{ tagged |
untagged
}
Required
The multicast VLAN must
be included and set as
untagged.